How to Use:
1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing
thread in the bobbin.
2. Select a straight stitch, zigzag stitch or decorative stitch. Avoid using stitches with side motion and
stitches with too much motion forward and back.
Tip: For the 6 mm wide trims, you can also use a 6 mm twin needle. Select a straight stitch and it
will sew at the edges of the trim.
3. Place the trim in the presser foot as
the picture shows.
4. Snap on the Decorative Trim Foot.
5. Engage IDT™
system.
6. Sew carefully, not too fast. If your machine has the
sew slow function, engage it.
(You might need stabilizer underneath the fabric)
7. The best result is achieved if you use flat trims,
such as silk, velvet, satin or cotton ribbons.