How to Use:
1. Select a straight stitch, snap on the Rolled Hem Foot and engage IDT™ system (if available on your
machine). If needed, press only the beginning of the hem to 2, 3 or 4 mm wide, depending on the size
of your foot. Place it flat in the groove under the foot and sew a few stitches. Lower the needle into the
fabric to hold it in place. Raise the presser foot and pull the cut edge of the fabric into the scroll of the
hemmer. Lower the foot and continue sewing while holding the cut edge up in front of the foot.
2. Do not allow fabric to run under the right half of the presser foot.